Download Article

Download Article

Soft-shut toilet seats work considering they take a special blazon of hinges that brand the toilet seat close on its own very slowly and quietly. Some soft-close toilet seat hinges can be adjusted to brand the seat close more slowly. Notwithstanding, not all soft-shut toilet seats have adjustable hinges, merely yous'll have to remove the seat and inspect the hinges to find out if yours are adjustable. If your soft-close seat isn't working like it used to and you can't adjust the hinges, you might have to set it by replacing the hinge dampers with a new prepare.

  1. 1

    Open your toilet seat and expect for metal hinges that sit down on vertical pegs. Metal peg-manner hinges are 1 of the 2 main types of hinge assemblies that soft-close toilet seats may use. Look for metal pegs coming up from circular plates attached to the back of the toilet bowl, which the hinges on the toilet seat slide onto.[1]

    • If you don't see this blazon of hinge assembly, your soft-close seat probably has a plastic clip-on type of hinge associates.

    Tip: If your toilet seat is loose, this doesn't have to practise specifically with the soft-close hinges. Yous can make adjustments to the bolts that hold the seat in place to fix a loose toilet seat. The just reason you would need to accommodate soft-close hinges is if your soft-close seat is not endmost at the right speed.

  2. 2

    Elevator the toilet seat directly up off the hinges from the upright position. Leave the soft-close seat in the fully open position. Hold the seat at the height and bottom or at both sides and carefully pull it straight upwardly off the metal pegs.[2]

    • If your toilet seat doesn't lift straight off, endeavor tilting it forward just a few degrees and see if you tin lift it off from that position.
    • If you can't slide the seat off the pegs, attempt pressing in the hinges with your thumbs and lifting it off. Different soft-close seats with peg-style hinge assemblies may have different locking mechanisms.

    Advertising

  3. 3

    Ready the toilet seat upside-down on a flat piece of work surface. Flip your seat over and then that the metal hinges are exposed. Lay the seat flat on a table or another flat surface.[3]

  4. 4

    Pull out the cylindrical dampers on both sides of the back of the seat. Grab the dampers between your fingers. Pull the cylinders all the way out of the holes they sit down in.[4]

    • These dampers are what really control the speed at which the seat closes.

  5. v

    Rotate the dampers towards the back of the seat to make it shut more slowly. Spin each hinge damper towards the back of the seat, ensuring that y'all align the shape of the dampers with the shape of the holes that they slide into. This will dull down the seat's hinges so they close it more softly and quietly. [5]

    • Not all soft-close toilet seat hinges are adaptable. If at that place are notches on the dampers that arrive and so you can only take them in and out in 1 position, they are non adaptable.
    • If your hinges are adjustable, they may be hexagonal or accept multiple notches that let you to put them in at different positions. They might likewise be labeled with "wearisome/fast" and directional arrows.
    • Depending on the specific soft-close toilet seat you accept, in that location might be 2-3 dissimilar positions yous can set the dampers in to command the speed of the seat.

  6. half-dozen

    Slide the hinge dampers dorsum into the swivel assembly. Push the cylindrical damper back into the hole in the hinge assembly on one side. Repeat this for the damper on the other side.[6]

    • If the soft-close dampers have multiple positions you can ready them to for different speeds, double-check that you are putting them in at the same position on both sides of the seat. Otherwise, the seat and lid might close at different speeds.

  7. seven

    Put the toilet seat dorsum on the toilet bowl. Align the holes in the seat's hinges with the begs on the toilet bowl. Set up the seat back on the swivel pegs in the upright position.[7]

    • If the hinges accept a locking machinery, brand sure y'all push the seat all the way onto the pegs until the hinges snap into identify.

    Advertisement

  1. 1

    Close the toilet seat and wait for rectangular plastic covers at the back. Plastic prune-on hinge assemblies are the second master type of swivel assemblies that soft-close toilet seats can accept. Look for rectangular plastic pieces that come up off the back of the toilet seat, which encompass the bolts in the toilet bowl that the seat'south hinges clip onto.[8]

    • If you don't see a plastic hinge assembly, your soft-close seat probably has metal peg-mode hinges.

  2. ii

    Slide the seat frontwards from the downwards position to remove it. Leave the seat all the way downward so that it is resting in the closed position on the toilet bowl. Flip upwardly the plastic hinge covers at the dorsum of the seat, then grasp the seat from the dorsum and pull information technology straight forrard off the toilet.[9]

    • If you lot are unable to slide off the toilet seat, you might have to unscrew the bolts from underneath on the dorsum side of the toilet bowl to remove it. Soft-shut toilet seats with clip-on hinge assemblies tin can have slightly different zipper methods, depending on the specific make and model.

  3. 3

    Identify the soft-shut seat upside-downward on a flat surface. Flip the seat over so that the swivel assembly is exposed. Lay it down on a flat surface with the hinges facing you.[10]

  4. iv

    Use needle-nose pliers to pull the cylindrical dampers out of the hinge assembly. Grasp the edge of 1 of the dampers between the pliers and pull to slide it out of the pigsty it sits in. Repeat this for the damper on the other side.[xi]

    • There might be a plastic cover on the underside of the hinge assembly that yous have to popular off to encounter the cylindrical swivel dampers. If and so, just pry it off with your fingers and set it aside. You might also be able to lift the whole hinge associates out of the toilet seat to work on it more than easily.

  5. 5

    Turn the hinge dampers towards the back of the toilet seat to wearisome it down. Rotate each hinge damper towards the dorsum of the seat to brand it shut more than slowly and quietly. Expect at any notches or markings on the dampers and look at the shape of the holes in the hinge associates to determine how far to turn the hinges to reinsert them at a new position.[12]

    • If there are only 1 set of notches on the dampers or their shape makes it so that they can only be inserted into the hinge associates in 1 position, they are not adjustable.
    • Adjustable hinges are sometimes hexagonal or take different notches so yous tin insert them at different positions. They could besides have directional arrows and be labeled with "dull/fast."
    • There might exist 2-3 different positions yous tin set the dampers in to set the soft-close seat to different speeds, depending on the make and model of the seat.

    Tip: If your soft-shut toilet seat's hinges are not adjustable, you can replace them with a new gear up, which costs less than $fifteen USD, to brand your seat piece of work like new over again. You could likewise supplant the entire seat for effectually $50 USD or less.

  6. 6

    Utilize your fingers to push the hinge dampers back into the swivel associates. Insert the cylindrical damper back into the hole in the hinge assembly on one side in its new position. Do the same with the damper on the other side of the seat.[13]

    • Brand sure you lot're putting both the dampers in the same position on their respective sides of the hinge assembly, or the seat and lid could close at different speeds.
    • If you removed the swivel associates from the seat or popped a cover off the hinge assembly, supervene upon these at this time equally well.

  7. seven

    Slide the toilet seat back onto the bolts at the back of the toilet bowl. Flip the toilet seat back over and ready it flat on the toilet bowl. Marshal the clips at the back of the hinge assembly with the bolts on the toilet bowl, then push the seat until information technology clips all the way back on. Press the plastic covers dorsum on top of the bolts.[14]

    Advertisement

Ask a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertizement

  • If yous tin can't accommodate the hinges on your soft-close toilet seat to make it close slowly and quietly again, y'all can supplant the hinge dampers or the whole seat at a low cost.

  • If the speed of your toilet seat is fine, merely yous want to tighten the seat to end it wobbling effectually, you don't need to suit the hinges. Yous tin can try tightening the bolts on the underside of the toilet bowl to gear up a loose seat.

Cheers for submitting a tip for review!

Advertisement

Things You'll Need

  • Needle-nose pliers

References

About This Article

Thanks to all authors for creating a folio that has been read 200,592 times.

Did this commodity help you?